How to view VLAN information using 'show vlan' IOS command

To view VLAN configuration information, open console connection to switch and run the "show vlan" IOS command from privileged mode as shown below.

omnisecu.com.sw01>enable
omnisecu.com.sw01#show vlan

VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5
Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/11, Fa0/12, Fa0/13, Fa0/14
Fa0/15, Fa0/16, Fa0/17, Fa0/18
Fa0/19, Fa0/20, Fa0/21, Fa0/22
Fa0/23
10 engineering active Fa0/1
20 planning active Fa0/10
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
10 enet 100010 1500 - - - - - 0 0
20 enet 100020 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0

Remote SPAN VLANs
------------------------------------------------------------------------------

Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------

Related Topics...

• What is Virtual Local Area Network (VLAN)

• Advantages of VLAN

• VLAN Membership Types

• How to create and name static VLAN

• Types of VLAN connection links - Trunk Links and Access Links

• VLAN Frame Tagging

• Inter-Switch Link (ISL) VLAN Tagging

• IEEE 802.1Q VLAN Tagging

• How to configure VLAN trunk link and native VLAN